Remove TAR , Dust & Water vapour
Transportable with 3 refillable bubbler
Inlet from process Hi-Temperature probe
Peltier cooler with 1 heat exchanger
Internal Sample pump
Gas sample out dry @ 5 ⁰C
Max Flow sample out 300 Nl/h
Low cost of ownership
Cooler maintenance free
Universal uses in sampling gas
Regarding the presence of tars in biosyngas, it may be stated that “tars” are equivalent to a major economic penalty in biomass gasification. Tar aerosols and deposits lead to more frequent maintenance and repair of especially gas cleaning equipment and resultantly lower plant capacity factors.
This leads to a decrease of revenues or to higher investments, as some equipment will be installed in duplicate to overcome standstills.
Furthermore, removal of tar components from the process wastewater requires considerable investments that can even be dramatic as some tar components show poisoning behaviour in biologic wastewater treatment systems.
In gas analysis it’s mandatory to have a a clean gas to feed the analyzer so the system flow firstly remove the majority of tar and dust through washing device , then by two degree precision filter, the gas chiller provide to remove the moisture and dust, as to obtain a kind of clean dry air. Finally, the sample gas through the protection filter goes into the analytical instruments .